The Z-LT-84 is a 2 channel Infrared transmitter and radiator that is easy to use and install
The Z-LT-84 is a 2 channel Infrared transmitter and radiator that is easy to use and install whilst also being a cost effective system that can provide a large area coverage. One CAT-5e cable provides both the power and the audio signal to the transmitter and to the Z-LA-141 expansion radiator.
Combined with Z-LR-4200 and Z-LR-5200 infra red receivers the Z-LT-84 can provide up to 30,000 ft² of coverage without gaps or null spaces. So to provide maximum flexibility in the field the two channel system can use up to four frequencies.
Available with a multitude of mounting and accessories options this infrared assistive listening system can provide for an array of applications.
Affordable, effective, and expandable solution ideal for small to mid-size spaces such as classrooms, courtrooms, boardrooms, and more
Multiple frequency options offer additional flexibility and simplicity during installation and setup
Offers gapless coverage up to 2,787 square meters (30,000 square feet)
Can be expanded with up to four (4) LA-141 expansion radiators for additional coverage area
One-cable design utilizes a single CAT-5e to carry both power and signal to LA-141 expansion radiators
Multiple input options for easier setup and operation
|Standards||FCC Part 15, ICS-03, CE, RoHS, WEEE|
Frequency Response 20 Hz - 20 kHz (+/- 1 dB) Line Input63 Hz - 15 kHz (+/- 3 dB) System. Specification (wireless end-to-end with LR-44).
Signal-to-Noise Ratio > 70 dB (SNR) Line Input> 60 dB (SNR) System Specification
Microphone Input Two (2) 3.5 mm (0.14 in.) Tip/Sleeve connector, -30 dBu nominal input, +14 dB headroom, impedance 4.4k Ohms, 5 VDC bias supply
Total Harmonic Distortion < 0.1% (THD) Line Input< 2% (THD) System Specification (wireless end-to-end with LR-44)
Unbalanced Line Input Stereo/Mono Input. Two (2) Dual (RCA) Phono connectors, unbalanced, -10 dBu nominal input, +14 dB headroom, impedance 10k Ohms
Balanced Line Input Mono Input. Two (2) Phoenix Type connector, balanced, + 4 dBunominal input, +14 dB headroom, impedance 100k Ohms
Power Switch Three (3) position switch - Power OFF, Power ON-Indicator Lights OFF, Power
ON-Indicator Lights ON
Carrier Frequency Selection Two (2), four (4) position rotary switches (2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz)
Level Control Knob Two (2) audio taper rotary potentiometer, counter-clockwise decreases input
mix level, clockwise increases input mix level
Power Supply LED Green LED on in-line power supply indicates AC power is applied
Audio Level Indicators Two (2) Green LEDs, two (2) Red LEDs, Green LED indicates Audio presence and Red LED indicates peaks in the audio
RJ-45 Amber LED Solid Amber indicates carrier is present and IR is being transmitted
RJ-45 Green LED Solid Green indicates power is applied to unit, flashing indicates unit has entered power save mode
Carrier Frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz, Selectable
Number of Channels Two (2) channels, Selectable carrier frequency
Frequency Accuracy +/- .005% stability 0 to 50 °C
Transmitter Stability 50 PPM
Modulation FM Wideband, ±50kHz deviation max, 50 ?S pre-emphasis
Power Save Mode Carrier will shut off when no audio is present for 15 minutes on both channels
to preserve radiator life
Expansion Link Output Two (2) RJ-45 connectors - Provides RF Signal and Power, CAT-5e cable 24
AWG, 100 ft. maximum cable length, two (2) LA-141s per output connector
Coverage Area 2,787 m² (30,000 ft²) single channel with LR-4200-IR/LR-5200-IR receivers or
697 m² (7,500 ft²) single channel with LR-42/LR-44 receivers
IR Emitter Power 1.49 W
Power Supply Input 100-240 VAC, 50-60 Hz
Power Supply Output 12 VDC, 4 A, 48 W
Power Supply Connector 2.5 mm ID barrel connector, center positive
Power Output Two (2) RJ-45 connectors. providing Power and RF signal for up to two (2)
LA-141 expansion radiators on each output
Power Supply Type In-line switching mode power supply, Listen part number LA-210
Ultrasensitive 4 channel iDSP infrared receiver with programmable OLED display and rechargeable lithium battery. Compatible with neckloops or standard stereo headphones.
Ultrasensitive iDSP infrared receiver with programmable OLED display and rechargeable lithium battery. Compatible with neckloops or standard stereo headphones.